No LabelBPC-157, TB-500 & GHK-Cu BPC 5 / TB 5 / GHK 50 (mg)
| Quantity | Discount | Price |
|---|---|---|
| 3–5 | 10% | $121,50 |
| 6–9 | 15% | $114,75 |
| 10–100 | 20% | $108,00 |
Specifications
- Brand: No-Label HGH, Peptides & SARMs
- Substance: BPC-157, GHK-CU, TB500
- Product Form: Powder
- Dosage: BPC 5 / TB 5 / GHK 50 (mg)
How To Use
Suggested Research Protocols (5/5/50mg Blend)
Because this vial contains a very high concentration of GHK-Cu (50mg), the following instructions emphasize high dilution to prevent injection site irritation. Please follow the reconstitution guide closely.
Reconstitution Guide (Important)
We highly recommend mixing this specific 60mg vial with 5ml of Bacteriostatic Water< to dilute the copper acidity.
- Total Content: 60mg active peptide.
- Concentration (with 5ml water): 12mg per 1ml.
- On a Standard Insulin Syringe (1ml/100 units): Every 10 Unitsequals approx. 1.2mg of the blend (1mg GHK-Cu + 100mcg BPC + 100mcg TB).
Zinc Supplementation is Mandatory: High doses of Copper (especially at Level 2 and 3) will rapidly deplete your Zinc levels. You MUST take an oral Zinc supplement (30mg to 50mg daily) throughout this cycle to prevent copper toxicity, fatigue and immune system suppression.
User Experience Level Usage Guide
Beginner
Sensitivity Test & Maintenance)
Best for users new to Copper Peptides or those with sensitive skin.
- Goal: Assess tolerance to Post Injection Pain (PIP) while receiving maintenance joint support and skin hydration.
- Dosage: 10 Units (0.10ml) per day.
- Daily Intake: Delivers ~1mg GHK-Cu / 100mcg BPC-157 / 100mcg TB-500.
- Frequency: 5 days on, 2 days off.
- Cycle Duration: 8-10 weeks.
Intermediate
The Glow Protocol
The standard protocol for cosmetic improvements and active recovery.
- Goal: Visible improvement in skin elasticity, reduction in fine lines and moderate joint lubrication.
- Dosage: 20 Units (0.20ml) per day.
- Daily Intake: Delivers ~2mg GHK-Cu / 200mcg BPC-157 / 200mcg TB-500.
- Frequency: Daily (7 days a week).
- Cycle Duration: 6-8 weeks.
Advanced
Skin Tightening & Repair
For experienced researchers targeting loose skin (e.g., after weight loss) or scar remodeling.
- Goal: Aggressive collagen synthesis and tissue remodeling.
- Dosage: 40 Units (0.40ml) per day.
- Daily Intake: Delivers ~4mg GHK-Cu / 400mcg BPC-157 / 400mcg TB-500.
- Frequency: Daily.
Note: At this dose, it is recommended to split the dose (20 units morning / 20 units night) to reduce stinging. - Cycle Duration: 4-6 weeks maximum.
Shipping Details
Detailed Description
What Is The No Label BPC-157, TB-500 & GHK-Cu (5/5/50mg) Blend?
The No Label Cosmetic Remodeling Blend is a specialized 60mg peptide formulation that leans heavily into the benefits of Copper Peptides while maintaining a baseline of structural repair support. Unlike our balanced blends, this specific ratio (5mg BPC / 5mg TB / 50mg GHK-Cu) is engineered for researchers prioritizing skin health, anti-aging and aesthetic improvements over acute injury rehab.
This vial contains:
- GHK-Cu (50mg): The star of this blend. A high-concentration dose designed to maximize collagen synthesis, DNA repair, and skin density.
- BPC-157 (5mg): Provides maintenance-level support for gut health and tendon durability.
- TB-500 (5mg): Supports cellular flexibility and systemic inflammation control at a maintenance dosage.
This ratio effectively makes it a Supercharged GHK-Cu product, fortified with the healing properties of BPC and TB to support the underlying tissue health.
Peptides such as BPC-157, TB-500 and GHK-Cu are frequently referenced in research exploring tissue-associated signaling and cellular response mechanisms. To explore related peptide formulations grouped under this research focus, visit our Recovery & Healing Peptides collection.
Benefits of the 5/5/50mg Blend
- Maximum Collagen Production: With 50mg of GHK-Cu, this blend is optimized to combat skin laxity (looseness), fine lines and photodamage. It targets the youth proteins in the skin.
- Cost-Effective Maintenance: By keeping BPC-157 and TB-500 at 5mg, this blend offers a more affordable entry point for those who don’t need heavy injury repair but still want the benefits of a multi-peptide stack.
- Hair Follicle Support: The high dose of GHK-Cu is widely researched for its ability to enlarge hair follicles and improve hair anchorage, making hair look thicker and healthier.
- Joint Lubrication: While the dosage of BPC/TB is lower than our injury stacks, it is sufficient to keep joints oiled and inflammation low during regular daily activities.
- Scar Tissue Reduction: The combination helps remodel old scar tissue, replacing it with healthy, organized collagen fibers.
Looking for other combination formulations? Browse our Peptide Blends collection.
How Does It Work?
This blend works by prioritizing the Dermal and Vascular systems:
The Glow Mechanism (GHK-Cu):
The massive 50mg component works as a feedback signal to the body’s stem cells. It tells the skin to remove damaged proteins and replace them with new ones. It also blocks the accumulation of free radicals that cause aging.
The Support Mechanism (BPC & TB):
At 5mg each, BPC-157 and TB-500 act as a safety net. While GHK-Cu improves the skin on top, BPC and TB ensure the fascia and connective tissue underneath remain healthy and inflamed, providing a solid foundation for the skin.
How long does it take to see results?
- Skin Texture: Improvements in hydration and texture are often reported within 2 weeks.
- Firmness/Elasticity: Significant changes in skin tightness usually require 4 to 6 weeks of the high-dose GHK-Cu.
- Joint Comfort: General relief from minor aches is typically felt within the first 10 days.
Comparison: 5/5/50 vs. 10/10/50
Which High Copper blend should you choose?
| Feature | This Blend (5/5/50) | The Repair Blend (10/10/50) |
|---|---|---|
| Focus | Cosmetic / Anti-Aging | Injury Rehab / Trauma |
| BPC/TB Dose | Maintenance (5mg each) | Therapeutic (10mg each) |
| Ideal User | Anyone wanting better skin/hair + joint support. | Athletes with tears, sprains, or surgery. |
| Cost Efficiency | Higher value for cosmetic goals. | Premium price for maximum repair. |
Need a higher-concentration option? Compare this low-dose blend with our
high-dose BPC-157 + TB-500 + GHK-Cu blend.
What are the potential side effects?
- Stinging (PIP): The high copper concentration can cause local irritation. Dilute well!
- Zinc Imbalance: High intake of copper can lower zinc levels. It is recommended to take a Zinc supplement orally during this cycle.
- Bruising: The injection site may look like a small bruise due to the copper; this usually fades within days.
Where can I buy authentic 5/5/50mg Peptide Blend online?
Finding a blend with such a specific cosmetic-focused ratio is rare. Peptidesline manufactures this No Label 60mg blend specifically for researchers focusing on longevity and aesthetics.
We guarantee that you get the full 50mg of GHK-Cu needed for real results, shipped fast to your door in the USA (4-7 days).
The Peptidesline Promise:
- Crypto Discounts: Save 10% instantly with Bitcoin, Ethereum, USDT or Litecoin.
- Secure & Easy: Pay via Zelle or Venmo.
- Discreet: Plain packaging ensures your privacy is protected.
FAQ
You can, but if you have a new or severe injury (like a tear), the 10/10/50 blend is a better choice because it has double the amount of BPC-157 and TB-500. The 5/5/50 blend is better for old, nagging injuries or general prevention.
This is a low-dose multi-peptide research blend combining BPC-157, TB-500, and GHK-Cu in a single formulation. It is commonly referenced in research contexts exploring tissue-associated signaling, cellular response pathways and structural peptide communication.
The 5mg formulation features lower peptide concentrations and is typically associated with maintenance-oriented or long-term research models. Higher-dose blends are generally explored in more intensive or short-term research contexts.
BPC-157 and TB-500 are frequently discussed in research related to tissue-focused peptide signaling. Combining them allows researchers to observe parallel pathway interactions within a single, lower-intensity research formulation.
GHK-Cu is commonly referenced in studies examining peptide signaling related to skin structure, extracellular matrix communication and cellular turnover pathways. In lower-dose blends, it is included to support balanced, multi-pathway research observation.
No. This product is provided strictly for research and analytical purposes only and is not intended for human consumption, medical use or self-administration.
Peptide blends are typically stored in a cool, dry environment and protected from light. For extended storage, researchers often follow standard peptide handling and cold-storage practices.
